SLR-100

SRL-100-12/24

Parameter

Input voltage：87-264Vac

Output power：100W

Output voltage：12Vdc/24Vdc

Feature

1. Protection: short-circuit, overload

2. 100% full-load aged

3. Withstand 300VAC surge input for 5 seconds

4. -20～+60℃Working temperature 

5. 5G vibration tested

6. High efficiency, long life span, and high reliability

Applications: Industrial automation machinery、Industrial control system、Testing and measuring instruments、Household appliances、

Led lighting appliances、Aging equipment、IT communication equipment

Warranty

2 years

Certificate

CE RoHS

 

Specification​​​​​​
Product No.SLR-100-12SLR-100-24
OutputDC voltage12V24V
Rated Current8.3A4.17A
Current Range0-8.3A0-4.17A
Rated Power100W100W
Ripple and Noise(Max)Note.2150mVp-p240mVp-p
Voltage adjustment10.8-13.2V22-27.6V
Voltage toleranceNote3±1%±1%
Linear Regulation Note4±0.5%±0.5%
LoadRegulationNote5±0.5%±0.5%
Setup and rise time1000ms,30ms/230VAC 1000ms,30ms/110V
Hold up time（Typ）50ms/230VAC10ms/115AC
InputVoltage range176-264AC
Frequency range50HZ/60HZ
Efficiency（Typ）80%82%
AC current（Typ）1.89A/110V0.95A/220V
Surge (Inrush) current (Typ)Cold start：65A/230VAC
Leakage Current<2mA/240VAC
ProtectionOverload>105% rated output power
Protection type：Hiccup mode, recovers automatically after fault condition is removed
Over voltage13.8V-16V28V-32V
Protection type：Recovers again by hand after close the output voltage
Over temperatureOverheat protection starts when temperature in transistor over 140℃
Recovers automatically after temperature is normal.
EnvironmentWorking temp.-20～+60℃
Working humidity20～90% RH,Non-condensing
Storage temp & hmdty-40～+80℃
Temp. coefficient±0.03%/℃（0～50℃）
Vibration proof10～500HZ,5G 10min/1 cycle，period for 60min. each along X、Y、Z axes
Safety reg. & EMC(Note.6）Safety regulationGB195110.1-2004/IEC61347-1:2003CE(EMC+LVD)
Voltage proofI/P-O:1.5KVACI/P-FG:1.5KVACO/P-FG:0.5KVAC
Isolation resistanceI/P-O/P, I/P-FG,O/P-FG:100M Ohms/500VDC/25℃/70% RH
EMC irradiationEN 55022A:2006;EN61000-3-2:1995+A2:2005
EMC disturbance proofEN 61000-3-2:2006;
OthersDimensions189x47x37mm(L*W*H)
Packing0.255kg/PCS;60PCS/15.3kg
Remark1. Unless specially indicated, all data are taken under 230VAC input, rated load and 25℃environment temp.
2.Ripple and noise: measured with a 12” double ripple cord connected in parallel with a 0.1μF and a 47 μF capacitor on 20MHz bandwidth.
3.Tolerance(Accuracy): including preset errors, linear adjustment rate and load adjustment rate.
4.Linear adjustment: taken under rated load from low voltage to high voltage.
5.Load adjustment: taken under 0~100% of rated load.
6. Power supply is taken as part of the whole system, and needs to be confirmed with terminal instruments for EMC.